Influence of inoculum size, CO2 concentration and LEDs on the growth of green microalgae Haematococcus pluvialis Flotow

Main Article Content

Khac Tam Pham Thu Chang Nguyen Thi Ha Luong Phu Hoang Dang Dinh Chi Vu Thanh Nhan Do Thi Cam Mien Phi Duc Bach Nguyen

Abstract

Green microalgae Haematococcus pluvialis is best known for astaxanthin production. The cultivation of H. pluvialis involves two main phases, namely green vegetative stage and cyst stage with astaxanthin accumulation. In fact, the growth of H. pluvialis in the vegetative stage is one of the most important parts in the entire cultivation process. The aim of the study is to investigate the influence of temperature, inoculum size, CO2 concentration and light emitting diodes (LEDs) on the specific growth rate, cell density and dry weight of H. pluvialis in the vegetative stage. Results indicated that the temperature from 25 to 28oC and the inoculum size from 3×104 cells.ml-1 were suitable for the growth of the studied strain. Illumination with red light LEDs (630 nm) at 80 μE.m-2.s-1, the highest specific growth rate (μ) was 0.197 day-1 and the maximal density was of 2.87×105 cells.ml-1. A concentration of 5% CO2 (v/v) was the optimal dose for the growth of this strain. Under the condition of both 5% CO2 and illumination with red light LEDs at 80 μE.m-2.s-1, the specific growth rate was 0.242 day-1 and the cell density was 4.28×105 cells.ml-1. Illumination with only blue LEDs (430 nm) at 120 μE.m-2.s-1 stimulated the astaxanthin accumulation with a maximum content at 2.36 μg.ml-1.

 

DOI: https://doi.org/10.31276/VJSTE.60(4).59-65

Article Details

How to Cite
PHAM, Khac Tam et al. Influence of inoculum size, CO2 concentration and LEDs on the growth of green microalgae Haematococcus pluvialis Flotow. Vietnam Journal of Science, Technology and Engineering, [S.l.], v. 60, n. 4, p. 59-65, dec. 2018. ISSN 2525-2461. Available at: <http://vietnamscience.vn/index.php/VJSTE/article/view/171>. Date accessed: 23 may 2019.
Section
LIFE SCIENCES